Master Chef outdoor Stovetop User Manual download pdf (Page 34)

Check that the links are correctly fitted and that the

terminal screws are tight. Secure the mains cable using

the cable clamp.

Current Operated Earth Leakage Breakers

Where the installation is protected by a 30-milliamp

sensitivity residual current device (RCD), the combined

use of your cooker and other domestic appliances may

occasionally cause nuisance tripping. In these instances

the cooker circuit may need to be protected by fitting a

100mA device. This work should be carried out by a

qualified electrician.

Hotplate

Check each burner in turn. There is a flame safety device

that stops the flow of gas to the burner if the flame goes

out. There is also a spark ignition system that works when

the knob is pressed in.

For each burner, push in and turn the knob to the large

flame symbol ( ).

The igniter should spark and light the gas. Keep holding

the knob pressed in to let the gas through to the burner for

a few seconds.

If, when you let go of the control knob, the burner goes

out, the safety device has not held in. Turn the control to

the off position and wait one minute, then try again this

time holding in the control knob for slightly longer.

Grill

Open the grill compartment door. Turn on the grill control

and check that the grill heats up.

Oven Check

Turn on the ovens and check that they start to heat up.

Turn off the ovens.

Fitting the plinth

Remove the 2 screws along the front bottom edge of the

cooker. Hold the plinth in place and refit the 2 screws.

Customer care

Please inform the user how to operate the cooker and

hand over these instructions.

Thank you.

SERVICING - WARNING

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished

Single Phase

Three Phase

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

No comments

Master Chef outdoor Stovetop User Manual Page 34